Axis Air AX-5330 Manual Del Usuario página 12

outer foil is deformed or damaged for any reason, do not use it and
replace it immediately with a new one. Otherwise, you risk scratching
or irritating your face.
1. Remove the shaver's cap, and slide down the power switch on.
Sliding down the power switch again will turn off the shaver. This is the
Lock-and-Slide feature.
2. Bring the outer foil of the shaver to your face and gently apply enough
pressure that your feel your beard being cut. Stretch the skin of your face
and move the shaver upwards against the grain of your beard.
Rear Rizer
TM
Rear Rizer
TM
knob
Axis Air |22| english
trimming
blade
> When shaving, be sure not to apply too much pressure between the
outer foil and skin on your face. Applying too much pressure can ir-
ritate your skin, as it may dull or damage the foil and wear the outer
foil out at a faster rate.
> When shaving delicate and harder to reach parts such as the chin or
neck, pull your skin tighter with your hand, and stroke upwards against
the grain of your beard. When shaving your neck, it is often beneficial
to lift your face upwards.
3. To use the trimming blade, slide it upwards. The trimming blade vi-
brates equally with the inner blade.
4. To cut your sideburns, apply the
trimming blade to the skin lightly
at 90°angle, and move the shaver
gently downwards.
5. After use, turn the power switch
Axis Air |23| english