Care And Maintenance - Axis Air AX-5330 Manual Del Usuario

Flex-Foil TM hood
-Foil hood
TM
release button
ease button
off and clean the shaver with the accessory brush.
Be sure to put the cap on after cleaning to protect
the blades.
*You can use soap or shaving foam with this shaver.
After every use with soap or shaving foam, be sure
to wash away the residues with water.
FINE mode
This mode is provided for shaving your upper and lower lips
1. ) Slide up the FINE mode switch to "FINE". The outer foil for FINE
mode will be pushed up.
2. Gently bring the outer foil in contact with your upper or lower lip, and
shave slowly while stretching the skin to make your beard stand up.

CARE AND MAINTENANCE

Before cleaning the shaver, be sure that the AC adaptor is discon-
Axis Air |2| english
correct incorrect
Rear Rizer
TM
Axis Air |2| english
nected from the shaver.
Washing in water
1. Slide the power switch off, and
press the outer foil frame release
buttons on the sides at the same
time to remove the outer foil
frame.
2. Slide the power switch on, and
wash the blades in cold or luke-
warm water. After washing, slide
the power switch off, and wipe
them dry with a towel or cloth.
3. Place the shaver in an
open-air resting place to dry it