Prince Castle 411-CFMCE Serie Manual Del Usuario página 6

2. While holding the time and temperature buttons,
press the up or down arrow buttons to adjust the
sound level. A continuous tone will sound.
Release all buttons when the desired sound level
is reached. The display will show the current
sound level. See figure 4.
figure 4
VIEW SET POINT TEMPERATURE
1. Press and release the temperature button. (Do not
hold for more than 6 seconds.) A beep will sound,
the temperature indicator will turn on, and the
display will show the set point temperature for three
seconds. The display will then change to show the
actual temperature. See figure 5.
figure 5
SET POINT TEMPERATURE
ACTUAL TEMPERATURE
VIEW TIMER SETTING
1. Press and release the time button. (Do not
press the time button for more than 6 seconds.)
The set time will be displayed for three seconds.
If the timer is activated and is in a countdown
sequence, the time remaining will be displayed,
and will continue to countdown to zero. After
three seconds, the display will change to show
actual platen temperature. See figure 6.
A L 2
2 1 5
2 1 6
figure 6
PROGRAMMING
The programming modes are used for setting individual
set point temperature, and setting toast times.
Programming the Set Point Temperature
1. Press and hold the temperature button for six
seconds. A beep will sound, the temperature
indicator light will blink, and the display will show
the current set point temperature. See figure 7.
figure 7
2. To change the set point temperature, use the up
or down arrow. Once the desired temperature is
displayed, press the temperature button to store
the new setting. See figure 8.
figure 8
ADJUST SET POINT TEMPERATURE
STORE SET POINT TEMPERATURE
6
SET TIME
2 0
215
2 0 4
2 0 4