Urmet 1740/95 Manual De Instrucciones página 3

ENGLISH
DESCRIPTION
Signo brackets 1740/95 are a dedicated product to be used on analog columns in the Ipervoice system
only; they may be used only for Signo monitors (b/w 1740/1 or colour 1740/40).
INSTALLATION
• Fasten the bracket to the wall with screws and bolts.
• Connect the CAT5 wire for connecting the system (D).
• For using the PANIC and CALL REPEAT functions, connect the corresponding wires to the supplementary
terminal board (B).
• Remove the cardboard protection.
• Confi gure the programming switches of the bracket (C). Refer to the system manual for details.
• Extract the video door phone stop catch (A).
• Fasten the video door phone to the bracket.
• Fasten the video door phone by pushing the stop catch (A) upwards.
§
Set the dip switches in the same way if the bracket is replaced.
DOOR PHONE CALL TONE
Five tones can be selected on Ipervoice system indoor stations.
The tones can be programmed also by the end user by following
the simple sequence below.
1. Hold the door opener button
button. The indoor station will play a tone.
2. Hold the door opener button pressed and press the button
again to change the tone.
3. Release the door opener button when you have chosen the tone
you want. The tone is now programmed.
FLOOR CALL TONE
Five fl oor call tones can be selected on Ipervoice system indoor
stations. The tones can be programmed also by the end user by
following the simple sequence below.
1. Hold the door opener button pressed. Press and release the
button . The indoor station will play a tone.
2. Hold the door opener button pressed and press the button
again to change the tone.
3. Release the door opener button when you have chosen the tone
you want. The tone is now programmed.
DS1740-010B
pressed. Press and release the
3