Publicidad
Idiomas disponibles
Idiomas disponibles
Bottom edge of the bracket
fixed to the gate
Fixing the gear motor
Lock the gear motor at the back with a hex head screw and relative nut and washer .
Position the gear motor frontwards with the hex head screw and relative nut and washer.
Manual release
1. Put the key in with the point facing upwards and turn it counter clockwise 90 .
Move the gate by hand
2.
Istruzioni Instructions Anleitungen Instructions istrucciones
0
Bottom edge of the bracket
fixed to the post
figure 2
figure 3
figure 4
- 12 -
Publicidad
