IVT PL-560-RC Manual De Instrucciones página 10

Instruction manual
TOOL SPECIFICATIONS
EN
Voltage ~ Frequency [V ~ Hz]
Rated power [W]
No-load speed [RPM]
Planing width [mm]
Planing depth [mm]
Rabbeting depth [mm]
Weight [Kg]
Safety class
PART LIST
1. On/Off switch
2. Lock-off button
3. Drive belt cover
4. Sole plate
5. V-groove
6. Additional handle with cut-depth set
7. Vacuuming connector piece
8. Parallel guide
9. Pan head screw
10. Blade
11. Drum
12. Drum plate
13. Adjusting plate
14. Set plate
15. Blade locating lugs
16. Heel of adjusting plate
17. Inside flank of gauge plate
18. Gauge plate
19. Gauge base
20. Blade edge
21. Screw
22. Hedge fence
23. Sharpening holder
24. Blade gauge
25. Wrench
CONTENT OF THE BOX
Instruction manual (1 pc), blade guage (1 pc),
sharpening holder (1 pc), parallel guide (1 pc), wrench
(1 pc), carbon brushes (2 pcs).
INTENDED USE
This model of planer is intended for hand-operated
planing, cutting of chamfers and rebating of wood and
wood-based materials.
Model PL-560-RC
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user's manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙ The tool must be assembled correctly before use.
∙
Only use the tool for its designed purposes.
∙
On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙ Never leave the tool unattended.
∙
Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙
Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙
The user is responsible for third parties while
working with the tool.
∙
People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
10
230 ~ 50
560
16700
82
1
8 - 9
3.5
I