Switching Off - Black and Decker GS2400 Manual De Instrucciones

ENGLISH

Switching off

• Press the O button of the on/off switch.
WARNING!
Do not operate the direction selector/switches in sequence using abrupt motions. Sudden switching may
generate current spikes potentially damaging the shredder.
Clearing a blockage (fig. C)
If the appliance becomes jammed by branches which are too thick or hard, or foreign bodies, the shredder will most of the
time release itself automatically. The rotating direction will automatically reverse thereby releasing the material back through
the top. To return the rotation back to normal, proceed as follows:
• Switch off and wait until the cutting blade has stopped completely.
• Switch on again with and the appliance will be back to forward rotation.
When the material is jammed:
• Switch the appliance off.
• Set the direction selector (2) to the right position.
• Press the I button until the blockage is removed.
WARNING!
Branches may be ejected from the inlet funnel when the appliance is running in reverse.
If the blockage has not cleared:
• Switch off and unplug the appliance.
• Use a piece of wood to loosen the debris within the cuttingchamber.
• Replace the plug in the mains socket and operate the appliance as described above to remove any debris.
WARNING!
Always switch off and unplug the appliance when removing a blockage. Do not attempt to remove
blockages by hand through the inlet funnel or outlet opening. Keep your
hands clear of the cutting chamber.
Hints for optimum use
• Shred dry materials last, as this will help to clear moist material from the shredder.
• Do not allow material to pile up and compost prior to shredding.
• You may feed shreddings into the shredder for a second time to further reduce their volume.
• Refer to the chart at the end of this text.
MAINTENANCE
Your Black & Decker appliance has been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper appliance care and regular cleaning.
• Keep the unit clean and dry.
• Do not use any abrasive or solvent-based cleaner.
• Regularly clean the ventilation slots in your appliance using a soft brush or dry cloth.
Adjusting the cutter plate
The cutter plate needs to be adjusted if the appliance fails to shred material.
• Turn the adjustment knob (7) clockwise half a turn into the cutting position to cut through light material completely.
All manuals and user guides at all-guides.com
20