Care And Maintenance; General Maintenance - Kobalt KT200A Manual Del Usuario

OPERATING INSTRUCTIONS
8. To stop the drill/driver, release the trigger switch and allow the tool to come to a complete stop.
The electric brake quickly stops the rotation. This feature engages automatically when you
release the trigger switch.
NOTE: This drill/driver is equipped with an electric brake. When the brake is functioning properly,
sparks may be visible through the vent slots in the housing. This is normal and is the action of
the brake.

CARE AND MAINTENANCE

GENERAL MAINTENANCE

All repairs should be carried out only by an authorized service organization.
Before cleaning or performing any maintenance, remove the battery pack from the tool. For safe
and proper operation, always keep the tool and its ventilation slots clean. Always use only a soft, dry
cloth to clean your drill/driver; never use detergent or alcohol.
CHUCK REMOVAL (Fig. 16)
The chuck can be removed and replaced.
1. Lock the trigger switch by placing the direction-of-
rotation selector in the center position.
2. Open the chuck jaws.
3. Use a screwdriver to remove the chuck screw by
turning it in a clockwise direction.
4. Insert a 5/16-in. or larger hex key
chuck of the drill/driver and securely tighten the chuck
jaws around the hex key.
5. Tap the hex key sharply with a mallet
a counter-clockwise direction. This will loosen the
chuck for easy removal.
NOTE: The chuck screw has left handed threads. Attach
a new chuck to the spindle and tighten the chuck screw.
(not included) into the
(not included) in
14
16