Publicidad
Idiomas disponibles
Idiomas disponibles
VERIFICATION OF CONFORMITY
KRÜGER TECHNOLOGY S.L.
Applicant Name & Address
Polígono Agustinos C/ G Parcela B2,
31013 Pamplona (Navarra) España
Product(s)
High pressure cleaner
Model(s)
KH602
Technical Specification
230-240 V-, 50-60 Hz, IPX5, Class Il
Additional information on page 2
Brand name
KRÜGER TECHNOLOGY S.L.
Relevant Standard(s)
EN 60335-1:2012+A11:2014
EN 60335-2-79:2012
EN 62233:2008
Directive(s)
Low Voltage Directive 2006/95/EC
Machinery Directive 2006/42/EC
Verification Number
EFSH15062216-IE-01-V01
Report Number(s)
EFSH15062216-IE-01-CDF, EFSH15062216-IE-01-EMF,
EFSH15062216-IE-01-L01
NOTE 1: This verification is part of the full test report(s) and should be read in conjunction with it.
This is the result of tests carried out on those samples of the produci referred to above which were submitted for testing, in accordance
with the specification for the respective standards. The sample(s) of the tested product has been found to comply with the relevant
standard/specification to the directive(s) listed on this verification at the time the tests were carried out.
The manufacturer according to definition by EU directive may indicate compliance to said directive(s) by signing a DoC himself and
applying the CE-marking to products identica! to the tested sample(s). In addition, the manufacturer shall file and keep the documentation
according to the rules of the applicable directive(s) and shall consider changes of the standard(s) if relevant. Additional requirements may
be applicable such as additional directives or locai laws.
The 'CE' marking shall consist in the initials 'CE' taking the following form:
The 'CE' marking musi be affixed to the product/s or to its marking plate. Where this is not possible or noi warranted on account of the
nature of the products, it must be affixed to the packaging, if any, and to the accompanying documents.
Verification issued by:
Eurofins Produci Testing Service Co., Ud.
Carlos Krüger
Gerente
2015-9-11
Paoe 1 of 2
ANNEXI
Verification of conformity Reference No.: EFSH15062216- I E-01-V01
Technical Specification
FB401: 1500 W, 4,0 I/min. Max. 5,5 I/min, 6,0 MPa, Max. 9,0 MPa;
FB515-1: 1600 W, 5,0 I/min. Max. 6,8I/min, 7,0 MPa,
Max. 10,5 MPa;
FB515-2: 1800 W, 5,5I/min. Max. 7,0 I/min, 9,0 MPa,
Max. 13,5 MPa;
FB616: 2000 W, 5,5I/min. Max. 7,5 I/min, 10,0 MPa, Max. 15 MPa
NOTE 1: This verification is part of the full test report(s) and should be read in conjunction with it.
This is the result of tests carried out on those samples of the produci referred to above which were submitted for testing, in accordance
with the specification for the respective standards. The sample(s) of the tested produci has been found to comply with the relevant
standard/specification to the directive(s) listed on this verification at the time the tests were carried out.
The manufacturer according to definition by EU directive may indicate compliance to said directive(s) by signing a DoC himself and
applying the CE-marking to products identica! to the tested sample(s). In addition, the manufacturer shall file and keep the documentation
according to the rules of the applicable directive(s) and shall consider changes of the standard(s) if relevant. Additional requirements may
be applicable such as additional directives or locai laws.
The 'CE' marking shall consist in the initials 'CE' taking the following form:
The 'CE' marking must be affixed to the product/s or to its marking plate. Where this is not possible or not warranted on account of the
nature of the products, it must be affixed to the packaging, if any, and to the accompanying documents.
Verification issued by:
Eurofins Produci Testing Service Co., Ud.
Carlos Krüger
Gerente
2015-9-11
Paae 2 of 2
Publicidad
