Imetec R6701 Instrucciones De Uso página 17

• DO NOT expose the appliance to humidity, to the effects of
weather (rain, sun, etc.) or to extreme temperatures.
• If the appliance is faulty or malfunctions, switch it off and do
not tamper with it. Contact an authorised technical service
centre for any repairs.
• This appliance shall not come into contact with water, other
liquids, sprays, steam. For any cleaning and maintenance
operation refer to the instructions in the relevant chapter.
• DO NOT use this appliance to warm animals.
• See the external packaging for the characteristics of the
appliance.
• Insert the control unit connector (5) into the heating pad connector (6)
to connect the control to the heating pad.
• Insert the heating pad on the cover (MOD.1 only).
• Insert the plug in the mains socket.
• Place the heating pad on the part of the body that is to be heated
(FIG. A, FIG. B).
SWITCHING ON AND SELECTING THE RIGHT TEMPERATURE
The control unit can be set to the following temperature levels:
5: Fast pre-heat temperature
4-3-2: Medium temperatures
1: Temperature for prolonged use
• Switch the heating pad on by pressing the ON/OFF button (4). The
temperature is automatically set at level 5, so LED 5 (1) will light up on
the control unit.
• To heat the heating pad quickly, use the maximum temperature 5. You
can then set a lower temperature level, depending on the degree of heat
required. To change the temperature, press the temperature selector (3)
until the LED (1) corresponding to the required level lights up on the control
unit. The higher the number selected, the higher the temperature.
• If the heatpad is used for a prolonged time, or when it's likely that you might
fall asleep with the heatpad still switched on, use temperature level 1.
USE
EN
16