Using Quicktrolleysystem - Handicare RiseAtlas625M Manual Del Usuario

Using the QuickTrolleySystem
1. Check to ensure that the lift unit's emergency stop is activated by pulling the emergency stop strap.
2. Place the lift unit on the rail by inserting the T-fitting (upside down) from the trolley into the hole on the top of the lift unit.
3. Press up, and then rotate the lift unit 90 degrees to lock the T-fitting in the lift unit.
4. Click the locking clip into place.
5. Check to ensure that the lift unit is secured to the trolley and that it can be moved along the rail. The lift unit must be
able travel freely on the rail system without obstruction and there must be no risk of the lift unit colliding with any objects
in its path.
6. To remove the lift unit from the rail, perform the above procedure in reverse.
Images 1-5: Locking the trolley to the lift unit.
SystemRoMedic 9
M A N U A L
TM