Timer Function (*Optional) - SUNFEEL DO4331ID Instrucciones De Instalación

Timer function (*optional):

The timer function is realized in two versions:
Minute minder timer (1..99 min):
The minute minder timer can be operated if the cooking zones are switched off. The timer display
shows "00" with a blinking dot.
Touch the timer setting key
range is between 0 and 99 minutes. If there is no operation in 10 seconds, the minute minder timer
will be set and the blinking dot will disappear. After the timer is set, the time runs down according to
the adjustment.
When the time is over, a signal sounds and the timer display blinks. The sound signal will be
stopped automatically after 30 seconds and/or by operating any key.
The minute minder timer can be changed or switched off anytime by operating the
key and/or decrease timer key
switch off the minute minder timer.
Cooking zone timer (1..99 min):
When the hob is switched on, an independent timer can be programmed for every cooking zone.
Select a cooking zone, then select the temperature setting and finally activate the timer setting
key , the timer can be programmed as a switch off function for a cooking zone. Around the timer
four LEDs are arranged. These indicate for which cooking zone the timer has been activated.
10 seconds after the last operation, the timer display changes to the timer that will run out next (in
case of programming more than 1 cooking zone).
to increase the time or touch
. Switching off the hob by touching
9
to decrease the time. Adjustment
increase timer
at anytime will also