SUNFEEL DO4331ID Instrucciones De Instalación página 16

· Apply the one-sided self-adhesive sealing tape supplied all the way round the lower glass edge of
the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it.
· Screw the 4 worktop mounting brackets on the side walls of product.
worktop mounting bracket
· Secure the hob in place by putting it into cutout on the work surface.
· Before inserting the oven, it is necessary to remove the rear kitchen element panel in the area of
the oven opening, in order to supply cooling. Equally, the front part
have an opening of no less than 5 mm.
Min. 10 mm
Min. 35 mm
Min. 5mm
Min. 10 mm
14
of the kitchen element must