Identification Of Components; Intended Use - Comet C610H Manual De Instrucciones

Ocultar thumbs

Contenido

Idiomas disponibles

Oil FlOW RaTE

(l/min - uSgpm)

1,0 - 15

29 - 7,7

630 - 166

33 - 8,7

645 - 170

37 - 9,8

655 - 173

Oil FlOW RaTE

(l/min - uSgpm)

1,0 - 15

45 - 11,9

642 - 170

50 - 13,2

655 - 173

56 - 14,8

660 - 174

62 - 16,4

665 - 176

Refer to Figure 1 at the beginning of the manual.

1. Suction

2. Delivery

3. Feet

4. identification plate

5. centrifugal pump

WaRninG

• Should the identification plate deteriorate during use, contact the Manufacturer or a Skilled

Technician to have it restored.

The identification plate (4) shows the motor pump model, the serial number, the year of manufacture

and the main hydraulic and mechanical specifications (max. flow rate, max. pressure, nominal rotation

speed, maximum rotation speed, etc.). It is located on the pump casing.

WaRninG

• The motor pump must not be run by itself. It is only meant to be integrated in a machine.

• The motor pump must be integrated in machines used for the following purposes:

- crop spraying and protection in agriculture and gardening;

- pumping water for non-edible use;

- transfer of non-viscous liquids.

• The motor pump must not be integrated in machines for pumping:

- solutions of chemical products the compatibility of which with the materials making up the motor

pump itself is not known (polypropylene, graphite-silicon-Viton®, stainless steel);

- fuels of all kinds and types;

- inflammable liquids or liquefied gases;

- edible liquids;

- solvents and thinners of all kinds and types;

2,0 - 29

3,0 - 44

600 - 159

470 - 124

635 - 168

625 - 165

650 - 172

645 - 170

3,0 - 44

4,0 - 58

620 - 164

510 - 135

650 - 172

640 - 169

650 - 172

640 - 169

650 - 172

640 - 169