Identification Of Components - Comet BPS TANDEM Instrucciones Para El Ensamblaje Y El Mantenimiento

Tabla de contenido

Idiomas disponibles

USING AND LOOKING AFTER THE MANUALS

WARNING

• The pump manuals complete that of the machine in which the pump is integrated: read all the manuals

carefully.

The manuals must be deemed an integral part of the pump and must be looked after for future reference

and kept in a protected place where they can easily be referred to in case of need.

The manuals contain safety precautions for the operator and those surrounding him/her and for the

protection of the environment.

In case of deterioration or loss, a new copy must be requested from the Manufacturer or from a Skilled

Technician.

In the event of the machine in which the pump is integrated being transferred to another user, please

also include the relevant manuals.

The Manufacturer reserves the right to make all the amendments required to update and correct these

publications without prior notice.

The symbol:

marking certain parts of the text indicates a likely chance of injury to persons unless the relative

prescriptions and indications are followed.

CAUTION

The symbol:

marking certain parts of the text indicates the possibility of damaging the pump unless the relative

instructions are followed.

(→MS)

The symbol:

indicates that reference must be made to the manual of the specific series of pumps.

Refer to Figure 1 at the beginning of the manual.

1. Pump support

2. Valve

3. Pump shaft

4. Volumetric oil compensator

5. Pressure accumulator

6. Pump head

7. Intake coupling

8. Intake /delivery valve cap

WARNING

• Should the identification plate deteriorate during use, contact the Manufacturer or a Skilled Technician

to have it restored.

The identification plate shows : the pump model, the serial number, the maximum rotation speed, the

maximum pressure, the maximum flow rate.

SYMBOLS

WARNING