Mounting Your Bicycle - Xplova NOZA ONE Guia De Inicio Rapido

Mounting your bicycle

Shift the chain on your bicycle to the smallest sprocket of the cassette and then
remove the rear wheel. Align the bicycle chain with the smallest sprocket of the
cassette of NOZA ONE, and then put on the chain as well as mount the bicycle on
NOZA ONE's axle to have the bicycle in a suitable position for riding.
Please use the bicycle quick release kit properly with care. When the arc of the
rotating arm of the quick release kit is toward outside, it means the kit is in a released
state. Rotate the rotating arm of the kit clockwise to tighten the quick release kit. The
rotating arm of the quick release kit should be placed on the other side of the NOZA
ONE's cassette body.
Please refer to the following illustration for the installation of the thru axle bicycle.
Insert the thru axle from the other side of the cassette and tighten the axle.
Attention:
1. Please firmly tighten the quick release lever and the thru axle to
prevent damage to property or human body. If you cannot tighten the
quick release lever and the thru axle, please contact your dealer or
Xplova customer service. Please DO NOT attempt to use the NOZA
ONE under this situation.
2. When mounting the bicycle, please lift its front wheel and press the
frame down to make the bicycle firmly mounted on the NOZA ONE.
EN-7
Assembly Instructions