To Set The Alarm - GPO Darcy Manual Del Usuario

TO SET THE ALARM

In Standby mode:
1. Press and hold the ALARM button to trigger alarm set mode then
AL1 or AL2 will begin to flash.
2. Press the STATION +/- button to scroll to <AL1>. Press and release
the ALARM button.
3. T he Alarm 1 hour will begin to flash then press the STATION +/-
button to adjust and press ALARM button to confirm.
4. Press the STATION +/- button to scroll to the hour for the alarm and
press and release the ALARM button .
5. T he minutes will now flash. Press the STATION +/- button to scroll to
the minutes for the alarm and press and release the ALARM button.
6. Press the STATION +/- button to scroll to the sound source for the
alarm. You can choose from Buzzer, FM & AM . Press and release
the ALARM button
7. Press the STATION +/- button to choose Alarm On and press and
release the ALARM button to confirm.
8. A L1 symbol in the left of the radio display will confirm that an alarm
has been set.
Note: The radio will then prompt you to set the time. An alarm can only
be set after the time has been set.
Note: Alarm 2 setting is same as Alarm 1.
Stop the Alarm
- When the alarm sounds, press and release the Standby button.
- Note: If you press the STANDBY BUTTON to stop the alarm, the
alarm symbol will remain in the display and the alarm will sound again
at the same time the next day.
- Turn off the Alarm
11