How To Start - KOMPAN MS30 Instrucciones De Montaje

3
Assembly
The KOMPAN Pirate consists of M numbers as
it appears from the perspective drawing. All posts
are pre-drilled and have numbers 5-1, 5-2, 5-3,
5-4, 5-5 etc. On each post a small red screw is
fixed. This screw indicates "top of surface", and
at the same time it indicates direction A. The red
screw must be placed in the same direction on
all posts.
Number and direction A of posts appear from the
plan drawing.
4

How to start

Floor panels for M54501 are placed on the ground
according to the plan drawing. Then go on to indicate
the position of posts at the corner of the floors. A string
may be placed before the elements are removed.
Check that there is adequate space for Bow M54002,
Boarding Net M83801, Transfer System M81701 and
Slide M36501 before starting to dig. Also, it is important
to make sure that all safety zones around the KOMPAN
Pirate are observed.
The safety zones (minimum space) are in compliance
with EN 1176. Please note that some countries require
conformance with other standards which may stipulate
larger safety zones (minimum space).
2/4
Jordoverflade
Oberkante Erdreich
Top of surface
Superficie de la tierra
Ras du sol
Livello del terreno
Maaiveld
Jordyta
M54001
5-5
MS
A