Stages cycling Stages Dash Guia De Inicio Rapido página 4

Installing/Removing Dash
1. Install mount to proper specification
2. Orient device in either portrait or landscape
position and line up with mount
3. Make sure lip of the mount is behind the aluminum
mounting rail
4. Slide Dash downward until the thumb tab audibly
clicks into place
5. Check to make sure the thumb tab is properly
seated in the mounting slot
6. To remove, pull back on thumb tab and pull straight
upwards on Dash. Dash should come out easily, if
you are forcing it, pull further back towards the bike
with the thumb tab
4