General Safety Instructions - LaserLiner AutoSmart-Laser Instrucciones De Uso

Read the operating instructions and the enclosed brochure "Guarantee
!
and additional notices" completely. Follow the instructions they
contain. Safely keep these documents for future reference.
Automatic rotary laser for horizontal and vertical levelling in
indoor and outdoor applications
– Accuracy 4 mm / 10 m, 4° self-levelling range
– The 90° reference beam is provided to plumb and align partition walls
– Laser modes: spot, scan, rotary and hand receiver mode
– optional SensoLite 100: Laser receiver range up to 100 m radius

General safety instructions

Caution: Warning signs must not be removed from the laser measuring
device! Do not look directly into the beam. Lasers must be kept out of reach
of children. Never intentionally aim the device at people. This is a quality laser
measuring device and is 100% factory adjusted within the stated tolerance.
For reasons of product liability, we must also draw your attention to the
following: Regularly check the calibration before use, after transport and
after extended periods of storage. We also wish to point out that absolute
calibration is only possible in a specialist workshop. Calibration by yourself
is only approximate and the accuracy of the calibration will depend on the
care with which you proceed.
08
GB
Laser radiation!
Do not stare into
the beam!
Class 2 laser
< 1 mw · 635 nm
EN 60825-1:2007-10