General Safety Instructions - LaserLiner PrecisionPlane-Laser 3D Pro Manual De Instrucciones

Read the operating instructions and the enclosed brochure „Guarantee
!
and additional notices" completely. Follow the instructions they
contain. This document must be kept in a safe place and if the laser
device is passed on, this document must be passed on with it.
Function / Application
Three-dimensional laser with three red 360° laser circles
and adaptable metal base
– Additional slope function for aligning inclines
– Motorised adjustment up to ± 2°
– Out-Off-Level: is indicated by optical signals when the unit is outside its
self-levelling range.
– Adaptable metal base for exact laser line positioning with the rotary casing
with vernier adjustment mechanism.
– Automatic levelling range 2°, accuracy 0.15 mm / m

General safety instructions

– The device must only be used in accordance with its intended purpose
and within the scope of the specifications.
– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should shut
their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments (magnifying glass,
microscope, binoculars) be used to look at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst laser devices
are in operation.
Laser radiation!
Do not stare into the beam!
Class 2 laser
< 1 mW · 635 nm
EN 60825-1:2014
PrecisionPlane-Laser 3D Pro
13
EN