Troubleshooting - Trust 18162 Manual Del Usuario

600VA UPS – User's Manual
Trouble Shooting
Problem Possible Cause
Alarm continuously The UPS is overloaded.
Sounds.
UPS doesn't work (both LED's off) The UPS was overloaded
UPS in off mode
Red LED flashing every 0.5 Alarm for over-temperatur
Protection
Seconds.
Solutions
Remove a connected device
(300W MAX).
1 Disconnect UPS from mains
2 Wait 5 seconds
3 Reconnect UPS to mains
4 Press circuit breaker.
Turn on UPS
Connect UPS to mains
Ensure adequate ventilation.
Allow the UPS to cool down.
3