Setup Instructions - Belkin F8E478ea Manual Del Usuario

Setup Instructions

Congratulations and thank you for purchasing this innovative product from Belkin mobility. Please review
this manual carefully in order to get the best performance from your Universal Mic Adapter.
To record:
1. Connect the Mic Adapter to the iPod and a microphone to the 3.5mm mono-audio plug on the
Adapter. The iPod will launch the "record" application when you do this. With the "Record" option
highlighted, press "Play/Pause" or press the "Select" button to begin recording. To pause recording,
press "Play/Pause" again or highlight "Pause" and then press the "Select" button on the iPod.
2. During recording, there are two options: "Pause" and "Stop and Save". To end a recording, either
press the "Menu" button or highlight the "Stop and Save" option, and then press the "Select" button.
This saves your recording and lists it by date and time recorded.
3. To begin another recording, go to the top of the "Voice Memos" menu and select "Record Now"; or,
from the iPod menu select "Extras > Voice Memos > Record Now".
3-Level Gain Switch
The Mic Adapter includes a three-level gain switch intended to optimize the quality of your recorded
audio. "Low gain" is activated by moving the switch to the left of the setting bar. "Medium gain" is
activated by moving the switch to the center setting in the setting bar. "High gain" is activated by
moving the switch to the right of the setting bar.
Please refer to the following to determine the best setting to select while recording:
For normal voice dictation
or high volume
For conversation and
conference
For lecture hall or low
volume
4
4890ea_F8E478ea.indd 4
Use low gain
Use medium gain
Use high gain
8/11/05 5:11:38 pm