Remote Control - Lifetime Air ATF-003R Manual De Instrucciones

REMOTE CONTROL

Push the
Push the
Push the
Push the
Push the
ASSEMBLY
Step 1: Line up the attachment pegs with the corresponding holes, then insert the
pegs into the holes.
Step 2: Line up the assembled base with the raised screw holes on the fan body.
Step 3: After connecting the body and the base, insert the screws into the screw
holes on the base. Put the power cable in the slot on the base.
Step 4: Set the fan upright.
Front
Back
Step 1
Body
Back
Flute
Step 4
button to start the fan.
button to select a fan speed - low, medium or high.
button to select the negative ion function.
button to make the fan oscillate. Push it again to stop it.
button to select a timer, from 1 hour to 8 hours.
Step 2
Assemble holes
Front
Back
plate
Screw holes
Screws
Body
Step 3
Screw holes
Body
Front
plate
Assemble
holes