EN
4 • Cleaning your vacuum cleaner
Wipe the body of the appliance and the accessories with a
soft cloth (Fig.33). Do not use detergents, chemical or
abrasive products.
TROUBLESHOOTING
IMPORTANT: As soon as you notice that your
vacuum cleaner is not working as well as it should
be and before carrying out any checks, switch it off
using the On/ Off button.
If your vacuum cleaner won't start
• The appliance has not got any power: check that the
appliance is correctly plugged in.
If your vacuum cleaner doesn't have any suction power
• An accessory or the flexible hose may be blocked: unblock
the accessory or the flexible hose.
• The cover will not close properly: check the positioning of
the bag, bag support and (H)EPA filter cassette and close the
cover.
If your vacuum cleaner has less suction power, makes noise,
whistles
• An accessory or the flexible hose is partially blocked:
unblock the accessory or the flexible hose.
• The bag is full or saturated with fine dust: replace the
Wonderbag* bag (18a) or empty the synthetic bag* (18b).
• The filtration system is saturated: change the (H)EPA* filter
cassette (ref ZR002901*) and put it back into its housing or
clean the (H)EPA* filter cassette (ref ZR005201*) as indicated
in the procedure.
• The mechanical power control switch (20b) is open: close the
power nozzle adjustable manual power switch.
GUARANTEE
• This product has been designed for domestic use only. Any
commercial use or professional use, inappropriate use or
failure to comply with the instructions, the manufacturer
accepts no responsibility and the guarantee will not apply.
ENVIRONMENT
• In accordance with current regulations, any appliance
which is no longer needed must be rendered unusable
once and for all: unplug and cut off the power cord be-
fore disposing of the appliance.
* Depending on models: either equipment specific to cer-
tain models or available as an optional accessory.
If the change bag light stays on Red
• The bag is saturated: replace the Wonderbag* bag (18a) or
empty the synthetic bag* (18b).
If the cover won't close (presence sensors 13, 14, 16)
• Check that that the bag support is fitted as well as the bag
and that it is positioned correctly.
• Check that the (H)EPA filter cassette is fitted or that it is
correctly positioned.
If the nozzle is difficult to move
• Reduce the power by opening the power nozzle adjustable
manual power switch (20b) or by moving the electronic power
control (9) to the MIN position.
If the power cord does not rewind completely
• The power cord is slowed down when rewinding: pull the
power cord out again and press the power cord rewind button.
If a problem persists, take your vacuum cleaner to your local
Rowenta Approved Service Centre. To find a list of Authorised
Service Centres, contact Customer Services, the contact
details for which you will find on the enclosed international
guarantee card.
• Read the instructions for use carefully before using your
appliance for the first time: any use of the appliance which
does not conform to these instructions will release Rowenta
from any liability.
Help us take care of the environment!
Your appliance contains many materials which can
be recovered or recycled.
Leave it at a waste collection point so that it can be
processed.
10