Belkin F5U005 Manual Del Usuario página 5

P74082ea_F5U005ea.qxd
Note: This device does not require drivers from Belkin
Components. The drivers are native to your operating system.
If the files are not found within your system, you will be
prompted for your Windows
you must contact your computer manufacturer for the
Windows CD that should have shipped with your PC, as
Belkin cannot issue the CD or drivers from the CD. Should
you need to enter your BIOS or adjust your IRQs during
troubleshooting, the Belkin technical support representative
will not be able to assist you because they are different for all
systems. You must contact your computer manufacturer for
detailed assistance. If you are using a Macintosh
you must make sure that you download the most current USB
card support from the Apple website (see instruction manual
for USB card support versions).
My PC crashes or I get a blue screen when I try to install
the card.
1. Shut the PC down and unplug power. Remove the card
from the PC and check to see if you have any free IRQs. If
you have at least one free IRQ available, try entering your
BIOS and enable your onboard USB controller. The
operating system will then detect your onboard USB
controller. Reinsert the card into an available PCI slot and
restart and your operating system will then detect and
install the card.
2. If you already have your onboard controller enabled, try
entering your BIOS to disable your onboard USB controller
and\or moving the card to a different PCI slot. If the issue
persists, please call Belkin Tech Support.
03-09-2002
ADDENDUM
USB BusPort
Belkin Part Number: F5U005
Troubleshooting Tips
CD. If the CD is not available,
®
1
11:59 Page 1
™
computer,
®
En