Components; Correct Use - I-DRILL MAS 12ib 2.0 Manual De Usuario

MC-5450520-Bediene-1308 02.08.13 08:23 Seite 68
Noise/vibration information
Measured values determined in
accordance with EN 60745-1,
EN 60745-2-2, EN 60745-2-1
The specified vibration emission value
was measured in accordance with a
standardised test procedure and can be
used in order to compare one electrical
tool with another.
The specified vibration emission value
can also be used for preliminary
evaluation of the disturbance.
CAUTION! The vibration emission
value may fluctuate from the
specified value during use of the
electrical tool. These fluctuations will
depend on the way in which the tool is
used.
Try to keep the vibration loads as low
as possible. Examples of measures
that may be taken to reduce the
vibration load include wearing gloves
when using the tool and limiting the
length of the working period. All parts
of the operating cycle must be taken
into account for this purpose (for
example, also including times in
which the power tool is switched off
and times in which it is switched on,
but is running without load).
3 – Components
1 Drill chuck
2 Torque setting with adjustment ring
3 On/off switch with integrated light
switch and rotation speed regulation
4 Clockwise/anti-clockwise running
5 Rechargeable battery
6 Charging unit
7 Charge control
68
8 Charging shaft
9 LED work light
10 Rechargeable battery display
11 HI/LO switch
12 Battery unlock button
13 Dual bit
4 – Correct use
Drilling in wood and metal, screw-
driving. Employ the machine,
charging unit and accessories (follow
manufacturer's directives!) for specified
area of application only! All other
applications are explicitly excluded.
This unit may not be used by people
(including children) with reduced
physical, sensory or mental capacities,
with a lack of experience and without
the appropriate knowledge, unless they
are supervised by someone who is
responsible for their safety or have been
instructed by such a person with regard
to how the unit is to be operated.
Children should be supervised to ensure
that they do not play with the device.
The machine is intended only for use in
the household.
Improper use of the product
All applications carried out with the device
that are not listed in the "Proper use"
chapter will be considered improper use.
Uses for which the tool is not designed
may cause risks and injury. Do not use
accessories that are not intended
specifically for this electrical tool.
Just because you can affix an
accessory to your electrical tool, there is
no guarantee it is safe to use.
The permitted revolutions of the tool
insert must be at least as high as the