Foreseeablemisuse; Gettingstarted - Kränzle FoamBoy 100 Instrucciones De Uso

Observetheinformationgivenbythemanufac-
turerofthemedium.
GB
G
In practice, sprayed liquids are a mixture of
various substances whose composition is
only known to the manufacturer. The suit-
ability of the unit for a specific liquid must
therefore be determined before use by the
user in conjunction with the manufacturer
of the substance.
Foreseeable misuse
G
The device is not suitable for:
- formic and hydrofluoric acid in any
concentration.
- acids and alkalis at concentrations
greater than the amounts quoted or
as mixtures.
- oils and fuels.
-Mediawhichmaycauseorpromotecracks
andfissuresintheplasticsused.
- liquids at temperatures over + 40°C.
- inflammable liquids.
- very tenacious or sticky liquids, or liquids
that leave residues, which cannot be
completely poured or flushed out of the
unit (oils and oil-bearing liquids).
G
On request, the manufacturer of the unit
can make available a detailed list of the
materials used in the parts of the unit for
more detailed examination.
G
Unauthorised changes to the unit made by
the user or inappropriate use shall render
null and void the liability of the manufac-
turer for any damage caused as a result.
Ersatzteile auf www.gluesing.net
Getting Started
WARNING!
Healthriskthroughleakingcleaning
fluid!!
Aleakingdeviceorleakingcomponentsmay
resultindrainingorspoutingofcleaningfluid.
Forthisreason,observethefollowingsafety
instructions:
-Check that the unit is in perfect condition
and properly sealed each time before use.
Pull up the safety / pressure relief valve (A)
by hand and check that it returns to the
starting position.
-Onlyoperateormovedevicewhenstanding
upright.
-Inspectallscrewjointsfortightfitting.
G
Unscrew the valve body (B) by rotating to
the left out of the container for filling.
G
Fill the tank, see "Max. filling volume" in
the Technical data section and the tank
scale for details on the maximum amount
that can be put in.
WARNING!
Contactwithcleaningfluidsposesa
healthrisk.
Observethemax.fillingamount(see
TechnicalData)andthecorrectdosinggiven
bythesprayproducer.
G
Screw valve body (B) back in and pump up
the device. Observe the safety / pressure
relief valve (A) during pumping. Peak pres-
sure is reached when the safety / pressure
relief valve is triggered. Any excess pres-
sure will escape through the safety / pres-
sure relief valve.
12