Emptyingandservice - Kränzle FoamBoy 100 Instrucciones De Uso

G
The spraying process is initiated by press-
ing the push button (G) on the valve body.
Releasing the push button (G) immediately
interrupts the spraying process.
G
Pump up the unit again once the pressure
has dropped to around 1.0 bar so as to
ensure a consistent distribution of the
sprayed liquid.
Emptying and Service
G
Anyresidualpressureinthetankcanbe
ventedbyliftinguptheknobonthesafety /
pressure relief valve (A).
G
Unscrewthepompcarefully,atfirstonlya
fewturnsbyleft-handrotation,sothatcom-
pressedairbeingstillinthetankcanescape.
Onlythenunscrewthepumpcompletelyand
takeitoutofthetank.
G
Emptyandwashouttheunitafteruse.
Note!Anyremainingliquidinthetank
canbeemptiedoutcompletelythrough
thefilleropening(incaseofliquidshaz-
ardoustowatersseechapter"Important
safetyinstructions"andobservethein-
structionsoftheliquidmanufacturer).
Thetypeofflushingliquidtobeusedand
howitistobedisposedofwilldependon
thedetailsgivenbythemanufacturerof
theliquidtobesprayed.Alsoconsider
whetherthetankisresistanttotheflush-
ingliquid.
Ersatzteile auf www.gluesing.net
G
The pump will last much longer if the
pump O-ring is lubricated from time to
time with a little resin- and acid-free
grease.
G
Iffoamingisnolongereffective,check
whethertheairinletboresintheconnecting
nipple(E)areclogged,cleanthemifre-
quired.
Note!Above-averageuseduetomanner
ofoperating(includingthetranportto
theplaceofoperationandthestorage
whennotusingthesprayer),influences
ofthesurroundings(oftheplaceofoper-
ationandthestorageplace),inadequate
maintenanceandcaremayleadtoan
earlywearofthesprayer.Therefore,the
sprayershouldbecheckedforsecureand
serviceablestatebeforeuse.Itshouldat
leastbecheckedforexternallyvisible
damages.
Expeciallywhenthereoccuredamages
whichendagerthesecurity,atleasthow-
everafter2years,thesprayershouldspe-
ciallybeexaminedbyoneofthemanu-
facturer'sservicestations.
13
GB