Steelcase 453 Instrucciones De Montaje página 3

Height/Width Pivot Adjustable Arm
1.
Disassemble the height/width pivot
adjustable arm assembly down to the level
that the trigger assembly can be removed.
a. While holding the arm firmly, remove
the large screw with black head.
NOTE: Be careful to note the order in
which the washers come off.
b. Remove assembly screws using a
#25 torx head screw bit from mounting
block.
c. Unsnap detents on trigger assembly
from mounting block.
1a
1b
1c
100-120 in/lbs
torque for
re-assembly
80-100 in/lbs
torque for
re-assembly
holes
Page 3 of 15
939530026 Rev A