MO-EL FURBI Uso Y Mantenimiento página 7

9.Do not bring modifications to the product that compromise the safe-
ty.
10.Keep connections dry.
11.Never plunge the appliance in water.
12.Never use hair spray when the appliance is working.
13.In order to assure an additional protection, it is suggested to install
in the electric circuit feeding the bathroom a safety switch with nom-
inal differential current not higher then 30 mA. Ask to the electrician
about this point.
14.In order to have the maximum efficiency, do not occlude the air
intake.
15.If the power supply cord is damaged avoid to use it. Let the Manu-
facturer, or the After Sale Service, or some similar qualified person
replace it, in order to avoid any risk.
16.Disconnect the appliance from the power supply when not used.
17.Always unplug the appliance before doing any maintenance opera-
tion.
18.Periodically verify the integrity of the appliance. If defects are found,
do not use it; call an Authorized After Sale Service.
19.In case of malfunction or fault, call an Authorized After Sale Service,
and request original spare parts.
INSTALLATION
This hairdryer must be installed out of the range of a person using the bath
or the shower.
Connect the plug in such way that the cable, when extended, do not let the
appliance to be near to the water contained in bath tubs, sinks, or other con-
tainers.
The hairdryers must be fixed to the wall with plastic expansion dowels. It is
recommended not to remove the appliance after installation for repositioning
it in another place.
1.Drill a hole into the wall to correspond with the fixing hole in the wall
support (I).
2.Screw the dowel with hook (supplied) into the hole in the wall.
3.Attach the wall support to the hook and gently press it downwards to
secure it in place.
4.Drill a second hole into the wall to correspond with fixing hole (H) and
7