SOUNDMASTER VCS3 Manual De Instrucciones página 9

1. Rotate the POWER/VOLUME knob clockwise until you hear a "click" sound to turn the
device on. The Power LED indicator will light up.
2. Put a record on the turntable platter. Remember to use the 45 RPM adaptor located on the
top-right corner when playing a 45 RPM record.
3. Remove the white plastic needle cover. Keep the needle cover in a safe and accessible
place for future use.
4. Select the speed according to the record you are playing.
5. Release the tone arm by unlocking the tone arm lock. Lift the tone arm by pushing back the
lift lever.
6. Gently move the tone arm towards the turntable. Then, push the lift lever forward. The tone
arm will gently descend onto the record and start playback.
7. When the AUTO / MANUAL switch is set to ON. the record stops at the end.
8. To pause or stop playing, you need to manually lift and move the tone arm back to the tone
arm rest.
1. Connect the RCA line out jacks to auxiliary input sockets of your home amplifier device
(cable not incl.). Make sure to match the socket colours up to the jack colours.
2. Then power on your amplifier device and adjust its volume level to your preference.
1. Rotate the POWER/VOLUME knob clockwise until you hear a "click" sound to turn the
device on.
2. Connect the line-in cable (not incl.) to the 3.5mm line-in jack on the unit and your audio
source. Unit is switching automatically to AUX IN when plug is in
To listen to music privately, use headphones with a 3.5 stereo jack plug and connect it to the
headphones socket. The speakers will then be muted.
To prevent possible hearing damage, do not listen at high volume levels for long
periods.
PHONOGRAPH FUNCTION
LINE OUT
LINE IN
HEADPHONE
2
VCS3 / English Instruction Manual