en-us Installation and connection
Saving energy
If you follow the instructions below, your appliance will use less power.
Note:
The arrangement of the fittings does not affect the energy consumption of the appliance.
Installing the appliance
Keep the appliance out of direct sunlight.
Install the appliance as far away as possible from heating elements,
cooker and other heat sources:
At least 1¼" (3 cm) from electric or gas cookers.
At least 11¾" (30 cm) from oil or solid-fuel cookers.
NOTICE:
If this is not possible, attach an insulating plate between the
appliance and heat source.
Select an installation location at a room temperature of approx. 68 °F
(20 °C).
Do not cover or block the ventilation openings.
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly.
Transport cooled wine in a cool bag and place in the appliance
quickly.
Always leave a space between the bottles and the back panel.
Do not cover or block the ventilation openings.
Vacuum the ventilation openings once a year.
--------
6
The appliance needs to cool less frequently at low ambient tempera-
tures and therefore consumes less power.
The appliance needs to cool less frequently if the warm air can
escape and therefore consumes less power.
The air in the appliance does not warm up so intensely. The appliance
needs to cool less frequently and therefore consumes less power.
The air can circulate, and the temperature will remain constant. The
appliance needs to cool less frequently and therefore consumes less
power.
The appliance consumes less power if the warm air can escape freely.