Connecting Data; Guarantee And Liability - Grammer AVENTO PRO M Instrucciones De Manejo

Connecting data


If you need to connect cables to the vehicle supply network, strictly observe the following
instructions:
Before you connect an electrical consumer fitted in the driver's seat (e. g. the seat
heater or the seat ventilation), you must obtain the relevant electrical data for the
respective vehicle with reference to voltage, protection and the kind of connections from
the manufacturer, from GRAMMER AG or the company's agencies.
For safety reasons, the installation and connection to the vehicle supply network must be
carried out by authorized specialist personnel only.
The seat connections must be protected independently of other vehicle components.
DC Heating
12 V
24 V
a) Optionally retrofitted trim! Values apply for foamed version.
The output signals of the seat are geared to be used with the control units
(input signal electronics).
DC
Maximally permissible
Minimally permissible
b) Optional, retrofitted equipment!
For building an electric connection, select an electric circuit by means of which the electric
consumers of the driver's seat are separated from the live network when the ignition is
switched off.
For building an electric connection, select an electric circuit by means of which the electric
consumers of the driver's seat are separated from the live network when the ignition is
switched off.

Guarantee and liability

 GRAMMER AG does not disclaim any guarantee or liability for damage resulting from
incorrect assembly, use or repair of the seats.
 Further details on the guarantee granted by GRAMMER AG are stated in your contractual
documents (see invoice or delivery note). Guarantee claims against GRAMMER AG
beyond the guarantee obligations described there are excluded.
GB
a)
10A
5A
Seat switch
Safety instructions
b)
Seat belt buckle switch
0.25W
1mA
b)
100mA
1mA
23