Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
INSTRUCTIONS FOR SIOUX 1292, 1296, 1292L, 1296L POLISHERS
Read and understand "Safety Instructions For Air Tools" and these instructions before operating this tool.
Make sure polishing pad has a higher speed rating than the tool. Do not exceed rated air pressure.
Always remove the tool from the air supply before changing polishing pads or doing any service on the tool.
AIR SUPPLY
The efficiency and life of this tool depend on the proper supply of clean, dry, lubricated air at a maximum of 90 psig (6.2 bars)
max. The use of a line filter, pressure regulator, and lubricator is recommended.
Before connecting the tool to the air line, blow out the line to remove any water or dirt which may have accumulated.
HOSE AND HOSE CONNECTIONS
A 3/8" (10 mm) I.D. air supply hose is recommended. Extension hoses should not be less than 1/2" (13 mm) I.D. 3/8" (10 mm)
I.D. couplings and fitting are recommended.
LUBRICATION
Use Sioux No. 288 air motor oil. An airline lubricator, set to deliver 1 to 2 drops per minute is recommended. If an airline
lubricator is not used, add .08 oz (2.4 cc, 25 to 30 drops) of oil to the air inlet twice daily.
GENERAL OPERATION
Start tool by depressing trigger or lever.
We, Sioux Tools Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the products
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
June 1, 2003
Murphy, North Carolina, USA
Date and place of issues
WARNING
This polisher is not guarded for use with a grinding wheel.
Do not operate this polisher with a grinding wheel.
Operating this polisher with a grinding wheel can cause injury.
Polishing pads that rotate at excessive speed can burst.
Polishing pads that burst can cause injury.
Tools left connected to the air supply can start unexpectedly.
Tools that start unexpectedly can cause injury.
SOUND AND VIBRATION READINGS
*Sound Pressure
Catalog No.
dBA
1292
80.2
1296
80.2
1292L
80.2
1296L
80.2
*per PN8NTC1
DECLARATION OF CONFORMITY
1292, 1296, 1292L, 1296L
EN 792 (draft), EN 292 Parts 1&2, ISO 8662, Pneurop PN8NTC1
following the provisions of
89/392/EEC as amended by 91/368/EEC & 93/44/EC Directives.
Gerald E. Seebeck
President
Sioux Tools Inc.
Name and position of issuer
*Sound Power
*Vibration
2
dBA
m/s
92.6
7.5
92.6
7.5
92.6
7.5
92.6
7.5
*per PN8NTC1
*per ISO 8662-8
Signature of issuer
1
Form ZCE483
Date 2003 June 23/C
Page 1 of 8
Printed In U.S.A.
Publicidad
Tabla de contenido
Manuales relacionados para SIOUX 1292
Resumen de contenidos para SIOUX 1292
- Página 1 LUBRICATION Use Sioux No. 288 air motor oil. An airline lubricator, set to deliver 1 to 2 drops per minute is recommended. If an airline lubricator is not used, add .08 oz (2.4 cc, 25 to 30 drops) of oil to the air inlet twice daily.
-
Página 2: Allgemeiner Betrieb
*per ISO 8662-8 KONFORMITÄTSERKLÄRUNG Wir, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, erklären hiermit alleinverantwortlich, daß die Produkte 1292, 1296, 1292L, 1296L, auf die sich diese Erklärung bezieht, mit den Anforderungen der folgenden Standards oder Normen oder Dokumenten übereinstimmen: EN 792 (Entwurf) EN 292 Teile 1&2, ISO 8662, Pneurop PN8NTC1... -
Página 3: Suministro De Aire
PN8NTC1 ISO 8662-8 LECTURA DE VIBRACIONES Y SONIDOS Nosotros, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declaramos bajo nuestra única responsabilidad que los productos 1292, 1296, 1292L, 1296L, con los cuales se relaciona esta declaración están en conformidad con las siguiente(s) norma(s) u otro(s) documento(s) normativo(s): EN 792 (anteproyecto) EN 292 Partes 1&2, ISO 8662, Pneurop PN8NTC1... -
Página 4: Lubrificante
PN8NTC1 ISO 8662-8 CERTIFICAZIONE DI CONFORMITA’ La Sioux Tools, Inc, con sede al 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, solennemente dichiara sotto la propria e sola responsabilità che i prodotti 1292, 1296, 1292L, 1296L sono conformi alle seguenti normative, standard o certificazioni:... -
Página 5: Lubrification
ISO 8662-8 DECLARATION DE CONFORMITE La société Sioux Tools, Inc., située à : 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, affirme que les produits 1292, 1296, 1292L, 1296L dont cette fiche fait l’objet, sont conformes aux normes, documents normatifs et autres références : EN 792 (ébauche) Parties 1 et 2 de la norme EN 292, ISO 8662, Pneurop PN8NTC1... -
Página 6: Slang En Koppelingen
PN8NTC1 ISO 8662-8 CONFORMITEITSVERKLARING Ondergetekende, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, verklaart met inachtneming van de eigen aansprakelijkheid desbetreffend, dat de produkten 1292, 1296, 1292L, 1296L waarop deze verklaring van toepassing is, conform zijn met de hierna genoemde norm, normen en/of andere regels en voorschriften:... - Página 7 *enligt PN8NTC1 *enligt PN8NTC1 *enligt ISO 8662-8 FÖRSÄKRAN OM ÖVERENSSTÄMMELSE Vi, Sioux Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, förklarar under eget ansvar att produkterna 1292, 1296, 1292L, 1296L som denna försäkran gäller uppfyller följande standard eller standarder eller andra normgivande dokument:...
- Página 8 Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw. andere Fortpflanzungsschäden hervorrufen.