Machine Information; Technical Specifications - VONROC LM501AC Traducción Del Manual Original

EN
Electrical safety
Warning! When using electric tools, basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury.
Read all these instructions before attempting to
operate this product and save these instructions.
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
The machine is double insulated in
accordance with EN60335; therefore no
earth wire is required.
Replacing cables or plugs
If the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
Using extension cables
Only use an approved extension cable suitable
for the power input of the machine. The minimum
conductor size is 1.5 mm
always unwind the reel completely.

2. MACHINE INFORMATION

Intended use
This product is designed for lawnmowing in domestic
environments. The lawn mower is intended for pri-
vate gardens at home. The lawn mower may not be
used to trim bushes, hedges or shrubs, to cut scaling
vegetation, planted roofs, or balcony-grown grass,
to clean (vacuum) dirt and debris off walkways, or to
chop up tree or hedge clippings. Moreover, the lawn
mower may not be used as a power cultivator to level
out high areas such as molehills. The equipment is
to be used only for its prescribed purpose. Any other
use is deemed to be a case of misuse.

TECHNICAL SPECIFICATIONS

Model No.
Voltage
Frequency
Power
No load speed
Cutting width
Cutting height
10
. When using a cable reel
2
LM501AC
230-240V
50Hz
1300 W
3300/min
320 mm
25/40/55mm
Grass box capacity
Weight
Protection level
Sound pressure level (Lpa)
Sound power level (Lwa)
Vibration value
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60335; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
- Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
- The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2-6.
1. Upper handle
2. On/off switch
3. Safety button
4. Power socket
5. Cable strain relief
6. Cable holder
7. Carrying handle
8. Wheel
9. Wheel cover
10. Grass box basket
11. Grass box lid
12. Grass box cover
13. Grass level indicator
14. Lower handle
15. Knob for handle
3. ASSEMBLY
Before assembly, always switch off the
machine and remove the mains plug from
the mains.
30 L
8.1 kg
IPX4
85dB(A), K=3dB(A)
96dB(A), K=2.21 dB(A)
<2.5m/s , k=1.5m/s
2 2
WWW.VONROC.COM