2.11 Printing The Test Results & Channel Data - MasterCool ULTIMA ID PRO 2 Manual Del Usuario

2.11 Printing the Test Results & Channel Data
The Test Results and Channel Data can be printed after every test is completed. Pressing
'PRINT' on the bottom of the screen will print the test results for all Analyzed Refrigerants.
The screen in (Figure 20) will display during printing. If printing Identified or 'Unknown
Refrigerants", pressing 'PRINT' will allow you to print the Channel Data from the test. (Figure
21) will display during Channel Data printing.
Once printing is complete, carefully tear off the printout and press 'BACK' to return to the
previous screen. Additional printouts may be made following the same procedure. To exit
the test, press the 'DONE' button. (Figures 22, 23, & 24) show sample printouts for various
test results.
NOW PRINTING
RESULTS
BACK
NOTE:
Care must be taken when tearing off the printed results to leave a clean edge. Tear
the paper from RIGHT to LEFT to avoid paper jams.
Mastercool Inc.
Refrigerant
Analyzer
R22 = 100.0%
AIR =
___________
(Date)
____________
(Technician)
___________
___________
Figure 22
Manual Part Number:
5-06-7000-70-2
- PRINTING -
DONE
Figure 20
Mastercool Inc.
Refrigerant
Analyzer
R410A = 100.0%
R125 =
0.0%
R32
AIR =
___________
(Date)
____________
(Technician)
___________
___________
- PRINTING -
NOW PRINTING
COMPONENTS
BACK
Figure 21
50.0%
= 50.0%
0.0%
Figure 23
Manual File:
MN-A-0289 Rev. E
DONE
Mastercool Inc.
Refrigerant
Analyzer
NON-CONDENSABLE
___________
(Date)
____________
(Technician)
____________
__________
Figure 24
Page 2-21