ICE CREAM MAKER
18
put into the refrigerator for freezing and then put into the
machine for making. In this way, the ice cream will soli-
dify ahead of time and the motor will lock. The motor will
be cut off because it enters the protection circuit ahead
of time.
20. After the machine starts freezing, do not remove the
motor and transparent cover during the working process.
21. This product cannot be used outdoors.
22. Do not use chemical washing liquids and hard tools
to clean the product. The bowl is not dishwasher safe, do
not wash the evaporator directly under water.
23. After the operation, please unplug the power plug in
time.
24. When the indicator light is on, the red light is in stan-
dby state. When the green light is on, it is in the working
state. When the green light flashes, it is in the heat pre-
servation state.
25. When you turn the ice cream maker on without adding
ice cream ingredients, you will slightly hear the mixing
paddle scratching the loading bowl, which is a normal
phenomenon.
26. There are two round copper sheets at the motor as-
sembly of the transparent cover installed on the upper
cover. When using, please wipe the water stains on the
transparent cover and on the copper plates. If the machi-
ne is in use, the two copper plates will be connected by
water, which will lead to power failure of the motor. Pull
out the power line, wipe the water stains, and restart it.
27. Retain the instruction manual.
28. Warning: Do not store explosive substances such as