Techno Line WS 6750 Manual Del Usuario página 13

Tip
You can adjust the time manually in case the clock cannot receive the DCF radio signal (due to
interferences, large distance to the sender, obstructions like mountains, etc.) As soon as the radio
signal can be received, the clock will be adjusted automatically.
Radio signal sender coverage up to 1500km distance to Frankfurt/Main.
Manual time set-up (the most important is to quit the reception of radio
controlled signal by holding together "+ "and"-" for 3 seconds in case of
the "radio tower"symbol flashing before set-up )

Press and hold key "MODE" for 3 seconds.

The display for the year is flashing. Use "+ " and "-" to select the year.

Press "MODE " to confirm.

The display for the month is flashing. Use "+ " and "-" to select the month.

Press "MODE " to confirm.

The display for the date is flashing. Use "+ " and "-" to select the date.

Press "MODE " to confirm.

The display for the time zone is flashing. Use "+ " und "-" to select the time zone
(-12 to +12).

Press "MODE " to confirm.

The language selection for the display of the weekdays is flashing. Use "+ " and "- " to select
the language.

Press "MODE " to confirm.

The 12/24 hour flashing. Use "+ " and "- " to select

Press "MODE " to confirm

The display for the hour is flashing. Use "+ " and "-" to select the hour.

Press "MODE " to confirm.

The display for the minutes is flashing. Use "+ " and "-" to select the minutes.

Press "MODE " to confirm.

The country /city flashing. Use "+ " and "-" to select the city of Sunrise/Sunset and Moonrise
/Moonset.

Press "MODE " to confirm.
Information:

The clock automatically changes from set-up mode to time display mode if no keys are
pressed for 20 seconds.

Explanation for the time zone display:
You can manually adjust the clock to the time zone of a country (up to 1500km distance to
Frankfurt/Main) where the clock receives the DCF signal but where the actual time differs
from the time received.
If, e.g. the time in a given country is 1 hour ahead of the German time, set the time zone
display to 01. The clock is now DCF controlled but the time is one hour ahead.
Daily alarm set-up