Safety Instructions; Product Description And Specifications - Bosch Kiox 300 Instrucciones De Servicio Originales

Safety instructions

Read all the safety information and in-
structions. Failure to observe the safety in-
formation and follow instructions may result
in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future ref-
erence.
The term battery is used in these instructions to mean all
original Bosch eBike rechargeable battery packs.
Do not attempt to secure the display or operating unit
u
while riding.
Do not allow yourself to be distracted by the on-board
u
computer's display. If you do not focus exclusively on
the traffic, you risk being involved in an accident. If you
want to make entries in your on-board computer other
than switching the assistance level, stop and enter the ap-
propriate data.
Set the display brightness so that you can adequately
u
see important information such as speed and warning
symbols. Incorrectly set display brightness may lead to
dangerous situations.
Do not open the on-board computer. Opening the on-
u
board computer may damage it beyond repair and void
any warranty claims.
Do not use the on-board computer as a handle. Lifting
u
the eBike up by the on-board computer can cause irrepar-
able damage to the on-board computer.
Do not stand your bicycle upside down on its saddle
u
and handlebars if the on-board computer or its holder
protrude from the handlebars. This may irreparably
damage the on-board computer or the holder. Also re-
move the on-board computer before placing the bicycle
on a wall mount to ensure that the on-board computer
does not fall off or become damaged.
Privacy notice
If the on-board computer is sent to Bosch Service because it
requires servicing, the data stored on the on-board com-
puter may be transmitted to Bosch.
Product description and
specifications
Intended use
The Kiox 300 on-board computer is designed to display cyc-
ling data.
To access the full functionality of the Kiox 300 on-board
computer, you will need a compatible smartphone installed
with the eBike Flow app (available from the Apple App Store
or the Google Play Store).
Bosch eBike Systems
Product features
The numbering of the components shown refers to the illus-
trations on the graphics pages at the beginning of the
manual.
(1) Display
(2) Front cable outlet
(3) Rear cable outlet
(4) Removal blocker
(5) Snap-in hook
(6) Adapter tray
(7) Display contacts
(8) Holder contacts
(9) Display mount
(10) Display mount fastening screw
(11) Bridge for retaining strap
Technical data
On-board computer
Product code
A)
Operating temperature
Storage temperature
Protection rating
Weight, approx.
A) Temperatures outside of this range may cause faults in the dis-
play.
Assembly
Inserting and Removing the Display
(see figure A)
To fit the display (1), attach the display (1) to the front edge
of the display mount (9) in the direction of travel, on the
snap-in hook (5) ❶ and press the rear side of the display (1)
on the display mount (9) ❷.
To remove the display (1), pull the display (1) towards you
❶ until you are able to lift off the display (1) ❷.
A retaining strap can be secured to the bridge (11).
Inserting the Removal Blocker (see figure B)
Insert the removal blocker (4) into the adapter tray (6) from
below until you hear the removal blocker (4) click into place.
From this point onwards, you can no longer lift off the dis-
play (1) from the display fixture (9) without removing the
display mount (9) from the adapter tray (6) by loosening the
two fastening screws (10).
Note: The removal blocker (4) is not an anti-theft device.
English – 1
Kiox 300
BHU3600
°C −5 to +40
°C +10 to +40
IP54
g 32
0 275 007 3BK | (24.06.2021)