Publicidad
Idiomas disponibles
Idiomas disponibles
Inside Leg Covers
1.
Snap the cover into the leg as shown.
2.
Make sure there are no gaps at the
bottom of the leg and the wire inlet hole is
located at the bottom.
3.
Same for the other three (3) legs.
NOTE: Same for both single & bench.
1
2a
2b
NO GAP
WIRE INLET HOLE
Channel Trim Plates
1.
Snap the trim plate into the holes
within the trough as shown.
NOTE: Same for both single & bench.
Page 2 of 5
939502106 Rev B
Publicidad
