TRES 193686506E Manual De Instrucciones página 14

EN
On, pause and off
Flow control (+)
Flow control (-)
Temperature regulation (+)
Temperature regulation (-)
Water outlet control
NOTES:
1- The digital shower system provides 5 fl ow levels (regulating the amount of water) and temperature control between 25°C
and 46°C.
2- When the temperature of the cold water entering is warmer than the selected temperature, the system matches the
temperature of the water coming out to that of the water entering the system.
3- When the temperature of the hot water entering is cooler than the selected temperature, the system matches the
temperature of the hot water coming out to that of the water entering the system.
4- When turned on, the water temperature is initially 38°C.
5- The water reaches its hottest temperature when the temperature is set at the maximum level and will be cold when the
temperature is set at the minimum level.
6- The selected temperature level is indicated by numbers and a colour scale:
Blue: 25°C 33°C / Fuchsia: 34°C
〜
7- The digital mixer tap shuts off automatically when the water has been fl owing continuously for more than 15 minutes.
8- The mixed water temperature is limited to a maximum of 46°C.
9- In the event of malfunction in the hot or cold water supply, the system locks and the fl ow of water shuts off .
Anti-scalding system, ideal for children and the elderly.
10- If the power supply is disrupted (power failure), the system shuts down. Once the power resumes, the system will remain
on pause for approximately 6 seconds and then shut down.
VERY IMPORTANT - For the digital shower system to work properly, the temperature
of the hot water entering must be between 55°C and 65°C, and that of the cold water
between 4°C and 29°C.
14
Each touch of this button produces a buzzing sound. The fi rst touch activates
the panel, which lights up to display all the available functions. The second
touch of this button deactivates the panel, while maintaining the fl ow and
temperature selections. Simply touch again to reactivate the system. If you
press and hold, the system is deactivated and the LED panel is shut off .
When the system is activated, each touch of the button produces a buzzing
sound and increases the fl ow by one level; one line (wave) is added to the
fl ow column on screen. Touching the button when the fl ow is already set to
maximum will have no eff ect.
When the system is activated, each touch of the button produces a buzzing
sound and decreases the fl ow by one level; one line (wave) disappears from
the fl ow column on screen. Nothing will happen if the button is touched when
the fl ow is already set to the minimum level.
When the system is activated, each touch of the button produces a buzzing
sound and increases the temperature by one level. Touching the button when
the temperature is already set to the maximum will have no eff ect.
When the system is activated, each touch of the button produces a buzzing
sound and decreases the temperature by one level. Nothing will happen if the
button is touched when the temperature is already set to the minimum level.
When the system is fi rst started, the water fl ows through the hand shower
(outlet 2). Each touch of the button produces a buzzing sound and changes
the selection between the hand shower and the shower head.
40°C / Red: 41°C 46°C
〜 〜