Leuze electronic CU405-2M12 Manual Del Usuario página 10

EN
Prerequisites for competent persons:
- They have a suitable technical education.
- They are familiar with the rules and regulations for occupational safety and
safety at work.
- They are familiar with the operating instructions for the device.
- They have been instructed by the responsible person on the mounting and
operation of the device.
Certified electricians
Electrical work must be carried out by a certified electrician.
Due to their technical training, knowledge and experience as well as their familiarity
with relevant standards and regulations, certified electricians are able to perform
work on electrical systems and independently detect possible hazards.
In Germany, certified electricians must fulfill the requirements of accident-preven-
tion regulations BGV A3 (e.g. electrician foreman). In other countries, there are
respective regulations that must be observed.
Exemption of liability
Leuze electronic GmbH + Co. KG is not liable in the following cases:
- The device is not being used properly.
- Reasonably foreseeable misuse is not taken into account.
- Mounting and electrical connection are not properly performed.
- Changes (e.g., constructional) are made to the device.
Overview
With the CU405-2M12 connection unit, you can connect an RSL 410 safety sensor
to corresponding fieldbus modules using an M12 cable with safety function for safe
electronic switching devices with OSSD in the device (self-monitoring)
dance with AIDA specifications.
MELD
The non-safe signal output of the RSL 410 is accessible via a second M12
connection.
1
ETH M12 socket, 4-pin, D-coded
Ethernet communication connection, M12 connection for functional earth
X1 M12 plug, 4-pin, A-coded
Connection
devices with OSSD in the device (self-monitoring)
cifications.
X2 M12 plug, 4-pin, A-coded
Connection of M12 cable for connecting the
M5 Connection for functional earth with M5 x 10 self-cutting/self-tapping (gas
tightness) screws for ground strap to EARTH/machine ground
10
of M12 cable with safety function for safe electronic switching
in accordance with AIDA spe-
MELD
output signal (signal output)
–in accor
-