Assembly Hopper Bench; What You Need - Extremis HOPPER BENCH Manual De Instrucciones

ASSEMBLING HOPPER BENCH

WHAT YOU NEED

2 people
spanner no. 17
screwdriver
+/- 20 min.
2. Remove the four screws from the two boards that prevent the table legs from moving during transport. Fold down
the cardboard flaps to have better access to the table legs. Take them out of the box and position them as shown in
the drawing. Depending on the size of the table put them 2,6 m (bench for 3 people) or 3,2 m (bench for 4 people)
apart.
3. Put the lid back on the box and put the 2 boards mentioned in step 2 on top of the lid. The box is now located
centrally with respect to the four table legs.
4

assembly hopper bench

1. Remove the lid of the box containing the table legs.
This is the box on the wooden pallet. To this end, just
cut the pallet straps. The packaging material must
stay intact for the rest of the assembly!