Descargar Imprimir esta página

Kärcher CNS 36-35 Battery Manual De Instrucciones página 31

Ocultar thumbs Ver también para CNS 36-35 Battery:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 100
gloves when working with the
device. Do not work barefoot.
Do not wear any jewellery, san-
dals or short trousers. ● Risk of
injury when loose fitting clothing,
hair or jewellery is caught by
moving parts of the device.
Keep clothing and jewellery
away from moving parts of the
device. Tie long hair back.
● Hearing protection can impair
your ability to hear warning
sounds, so pay attention to haz-
ards in your vicinity and in the
work area. ● Only use accesso-
ries and spare parts which are
approved by the manufacturer.
Only original accessories and
original spare parts ensure that
the appliance will run fault-free
and safely.
Chain saw safety warnings
 Keep all parts of the body
away from the saw chain
when the chain saw is oper-
ating. Before you start the
chain saw, make sure the
saw chain is not contacting
anything. A moment of inat-
tention while operating chain
saws may cause entangle-
ment of your clothing or body
with the saw chain.
 Always hold the chain saw
with your right hand on the
rear handle and your left
hand on the front handle.
Holding the chain saw with a
reversed hand configuration
increases the risk of personal
injury and should never be
done.
 Hold the power tool by insu-
lated gripping surfaces on-
ly, because the saw chain
may contact hidden wiring
or its own cord. Saw chains
contacting a "live" wire may
make exposed metal parts of
the power tool "live" and could
give the operator an electric
shock.
 Wear safety glasses and
hearing protection. Further
protective equipment for
head, hands, legs and feet
is recommended. Adequate
protective clothing will reduce
personal injury by flying debris
or accidental contact with the
saw chain.
 Do not operate a chain saw
in a tree. Operation of a chain
saw while up in a tree may re-
sult in personal injury.
 Always keep proper footing
and operate the chain saw
only when standing on
fixed, secure and level sur-
face. Slippery or unstable sur-
faces such as ladders may
cause a loss of balance or
control of the chain saw.
 When cutting a limb that is
under tension be alert for
spring back. When the ten-
sion in the wood fibres is re-
English
31

Publicidad

loading

Este manual también es adecuado para:

1.444-050.0