turbionaire AMBIO 90 Manual De Instrucciones página 6

4. INSTALLATION
A . Installing on the concrete wall:
4.1.1 Removed the mounting plate
Remove the plastic parts, unclamping
the fixed screws on the back of main
body toremove the mounting plate.
4.1.3 When the cement has freeze,
fit the mounting plate (use the
washer and nut according to the
following)
4.1.2 Fix the bolts in the proper position
(fix the position with the mounting plate
and pour cement into the bolt holes.)
4.1.4 Install the main body
Set the main body onto the upper end of the
mounting plate, and clamp it as below. Make
sure it's well fixing