English
ATTENTION! Danger of damage to the
device and battery!
If the device is operated with an unsuitable
battery, both the device and the battery may
be damaged. Only operate the device with
the specified rechargeable battery.
For charging the rechargeable battery, the
charging unit 2.4 A BT-CLC004 (7063688),
4 A BT-CLC003 (7063554) or Dual fast
charger 2x 3.5 A BT-CLC006 (7063910) is
required.
Vibration load
3.3
WARNING! Danger due to Vibration!
The actual magnitude of the vibration
emissions during the operation of the
device may deviate from that stated by the
manufacturer:
– when the device is not operated as
intended;
– when the device is not in a proper
condition of use.
Noise pollution
3.4
A certain level of noise exposure from the
device is inevitable.
Carry out noisy work at approved and
specified time periods. Observe rest periods
as necessary.
For your personal protection and protection
of persons in the vicinity, appropriate
hearing protection must be worn.
WARNING! Danger due to incomplete
assembly!
Operation of an incompletely assembled
device can result in serious injury.
Only operate the device when it is fully
assembled!
Do not insert the battery into the device until
it is fully assembled!
4. Before first use
• Remove the device and all additional
parts out of the packaging.
• Check all parts for damage in transit
and do not use a damaged device.
• Keep packaging materials out of reach
of children. There is risk of suffocation!
8
5. Assembly – Using as leaf blower
Before starting work, mount the
5.1
included accessory on the
multifunctional blower. The two-piece
blowing tube consists of the cone
nozzle (1) and the extension tube (2)
and is equipped with bayonet lock (7).
Mount the assembled blowing tube on
the device and make sure the
assembled blowing tube is properly
locked.
Make sure the battery is fully loaded.
5.2
For detailed information read and
observe the instruction manuals of the
rechargeable battery and charger.
Insert the battery straight into the
5.3
recess of the device and push the
battery up to the end until you hear a
click sound.
To remove the battery, first depress the
5.4
unlocking button and pull out straight
from the device. Do not force the
battery when inserting into the device
or removing.
6. ON/OFF trigger
To switch on the device, press the ON/
6.1
OFF trigger (6).
To switch off the device, release the
6.2
trigger.
7. Lock button for ON/OFF trigger
For locking the ON/OFF trigger (6),
7.1
press the ON/OFF trigger and
afterwards press the locking button (4).
The ON/OFF trigger is now locked in
place. Release the ON/OFF trigger.
For unlocking and switching off the
7.2
device, press the ON/OFF trigger and
release it. The locking button (4)
automatically snaps back in place and
the device switches off.
8. Hints on correct working
technique
• WARNING! Only operate the device
when the blowing tube properly
assembled. There is risk of injury!
• Hold the device firmly in your hand. The
multifunctional blower is designed for