Easy Pairing - Yamaha TSX-B141 Manual De Instrucciones

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Easy pairing

For the smartphone with NFC (Near Field Communication) function, you can easily perform the pairing
operation just by holding the smartphone over the NFC mark (you need to turn the unit on and turn on the NFC
function of the smartphone beforehand).
Top panel
NFC
mark
Listening to a Bluetooth device
Front panel
1
SOURCE
12
En
1
Press to turn the unit on.
2
Hold the smartphone over the NFC mark.
3
Perform the pairing operation at the
smartphone (for details, please read the
owner's manual of the smartphone).
This unit is indicated as "TSX-B141 Yamaha"
on the smartphone.
y
• If you are prompted for a passkey, enter the numerals
"0000".
• If the connection fails, move the smartphone slowly
on the NFC mark.
• If the smartphone is equipped with a case, remove
the case.
1
Set SOURCE to BLUETOOTH.
2
Connect this unit and your connecting
device via Bluetooth.
3
Play back music from your Bluetooth
device.
Note
Take care that the volume setting of this unit is not too high.
y
• If you connect via Bluetooth from your connecting device
and play back music while the unit is in standby mode, the
unit will automatically turn on.
• If you disconnect the Bluetooth connection from your
connecting device while the playback source is set to
Bluetooth, the unit will automatically enter standby mode.
• If the Auto Standby is enabled and Bluetooth is selected
as the playback source, 20 minutes with no Bluetooth
connection and no operation makes the unit enter standby
mode automatically.