Usb Device Playback - Yamaha TSX-B141 Manual De Instrucciones

CD playback
Problem
Disc cannot be inserted.
Some button operations do not
work.
Playback does not start after
pressing (playback stops
immediately).
The CD indicator flashes twice,
and repeated 3 times, and the
disc is ejected.
"Err" is displayed in the front
panel display after loading a
disc.

USB device playback

Problem
MP3/WMA file in the USB
device does not play.
The USB indicator flashes twice,
and repeated 3 times, after
connecting a USB device.
Cause
The unit is set to Eco Standby mode.
A disc is already inserted.
The disc loaded into the unit may not be
compatible.
The disc may be dirty.
The disc loaded into the unit may not be
compatible.
If the unit was moved from a cold to
warm place, condensation may have
formed on the disc reading lens.
The disc loaded into the unit may not be
compatible.
The disc may be dirty.
The disc does not contain playable files. Use a disc contains playable files
The disc is loaded back to front.
An error occurs in the unit.
Cause
The USB device is not recognized.
An incompatible USB device is
connected to the unit.
The USB device does not contain
playable files.
TROUBLESHOOTING
Solution
Press to cancel Eco Standby mode
(☞ P. 4).
Press to eject the disc.
Use a disc supported by the unit (☞ P. 26).
Wipe the disc clean.
Use a disc supported by the unit (☞ P. 26).
Wait for an hour or two until the unit
adjusts to the room temperature, and try
again.
Use a disc supported by the unit (☞ P. 26).
Wipe the disc clean.
(☞ P. 26, 27).
Insert a disc facing the label side to near
side.
Eject the disc with .
Solution
Set the unit to standby mode and disconnect
the USB device. Then, turn the unit on and
reconnect the USB device.
Connect an AC adaptor if supplied with the
device.
Set the unit to standby mode and reconnect
the USB device to the unit. If it does not
resolve the problem, the USB device is not
playable on the unit.
Use a USB device contains playable files
(☞ P. 26, 27).
23
En