Publicidad
JBL CINEMA
Quick Start Guide
Guide de démarrage rapide
7
Charging external devices
Note: USB is designed for charging and software updates only. USB will not support
direct-connect audio streaming.
8
Remote learning feature
The Cinema Base has the ability to learn the volume control and power infrared (IR) codes of
your IR TV remote control.
Get your Cinema Base to control TV Volume (in operational mode) using this simple
procedure:
1. Press and hold the top panel 'Surround' key until the system enters learning mode
(the LED will blink orange).
2. VOLUME + : Press 'Volume +' on the soundbar and then press 'Volume +' on the TV
remote control.
3. VOLUME − : Press 'Volume –' on the soundbar and then press 'Volume –' on the TV
remote control.
4. MUTE: Press 'Volume +' and 'Volume –' together on the soundbar and then press
'Mute' on the TV remote control.
5. POWER: Power On your soundbar by pressing the 'Power' key on the soundbar and
then pressing the 'Power' key on the TV remote control.
Note: After each TV IR code is successfully learned the blinking orange LED will turn white
for 1 second. The Cinema Base is ready to learn the next key after the white LED
disappears and the blinking orange LED restarts.
Press and hold the panel 'Surround' key again to exit learning mode (The orange LED
will stop blinking).
BASE
™
USB
Publicidad
